EVO–BLOCKSEAL

DESCRIPTION

EVO-BLOCKSEAL EARTH FRIENDLY WATERPROOFING SYSTEM BASED ON ADVANCED ACRYLIC POLYESTER POLYMER TECHNOLOGY

EVO-BLOCKSEAL - Penetrating up to 100mm, inorganic transparent water based impregnate. Outperforming all silane and standard acrylic solutions. Negative pressure to 4 Bar (60 psi).

Non toxic, non-caustic, non-flammable, polyester polymer formulation.
Waterproofs, insulates, hardens and preserves concrete blocks permanently.
Causes a chemical reaction that solidifies the component parts of pre-cast block, masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, cracking, seepage as it increases the density of the substrate, increases wear capability.

APPLICATION FIELDS:

• All old or new concrete blocks, masonry used in Block wall construction.

ADVANTAGES:

• Suitable over weak and old substrates.
• 50 to100mm masonry penetrating saturant.
• Prevents saponification of paints, does not contain oils or solvents.
• Prevents efflorescence.
• Safe for users and adjacent areas, it does not require special protection equipments.
• Non-corrosive, non-toxic and non-flammable.
• Environmentally friendly. Saves hazardous classified materials transportation cost.
• Problem free bond for paint.
• Can be rendered or painted.
• Will not harm glass, tiles or aluminium.
• Permanently waterproofs and preserves, Concrete Blocks, Cement Bricks and Sandstone.
• Dries clear with a slight sheen

SURFACE PREPARATION:

• Preparation of the surface
• Fill all holes and cracks

Clean the surface to be treated to remove dust, grease, salts, or unsound particles and loose or cracked paint, to optimize the penetration of EVO-BLOCKSEAL.
It is critical that missing mortar and cracks are repaired prior to sealing with a suitable cement repair mortar.
Surfaces to be treated must be clean and dry.