EVO–BOND

EVO–BOND PRODUCT INFORMATION

DESCRIPTION

100% ACRYLIC EMULSION ADDITIVE

EVO-BOND is a 100% ACRYLIC INDUSTRIAL STRENGTH admixture. A longer lasting acrylic composition for adding to cement mixtures for better workability and unequalled render adhesion to non porous surfaces.

It is a special non-corrosive, non-flammable, non-carcinogenic, biodegradable and non-hazardous formulation with no solvents or other aggressive chemicals.

APPLICATION FIELDS:

  • General industrial, commercial and residential.
  • Skim coating over old concrete and masonry surfaces.
  • Masonry, brick, block structures, walls, sloping floors.

ADVANTAGES:

  • Not sticky on trowel.
  • Enhances strength, durability and adhesion of cement based materials.
  • Suitable for formulation of conventional lightweight renders and coatings, waterproofing systems, patching and repair mortars.
  • Replaces hacking and chicken wire to walls before plastering painted surfaces.
  • Dries quickly and hardens all cement repairs in less than 30 minutes.
  • No degradation or colour development to exterior exposure.

SURFACE PREPARATION:

Preparation of the surface
Remove all loose material and remove build-up of efflorescence, dust and grime.
Brush EVO-BOND onto surface or area to be repaired first to pre-prime

If required use EVO-POWERCLEAN

COVERAGE:

4.5 litres mixes with 25 kg of sand and cement mixture. Coverage depends on thickness of coat and roughness of surface.

APPLICATION:

Should incorporate mixed 4:1 with clean water and increases adhesion to non porous surfaces. Apply sand/cement mixture as per industry practise. Apply mortar mix while prime coat is still wet.

CLEANING:

Tools and equipment should be cleaned immediately with water after use.

PO Box 84, Campbelltown, NSW 2560 | 1800 539 339 | info@mwsystems.com.au

MWS Masonry Waterproofing Systems Logo
Scroll to Top